How to clean the parts of corrosion-resistant centrifugal pump.
Cleaning corrosion-resistant centrifugal pump is a professional skill that every staff must master skillfully. There are two kinds of cleaning of equipment in maintenance: external cleaning of mechanical equipment and cleaning of parts and components. Different cleaning has different meanings. Parts cleaning can be divided into pre-cleaning, pre-assembly cleaning, parts cleaning and pre-welding cleaning. In the cleaning part, the cleaning standard height of cleaning and bonding parts, the cleaning quality is not high. This is usually the reason for the failure of painting or bonding. The cleaning quality and service life of the parts assembly have a great influence on the mechanical equipment.

Cleaning method.
1. Scrape off the accumulation and rust of impellers, sealing rings, bearings, etc., and then clean them with water or compressed air.
2. Clean up the oil and rust on the surface of the connector of any pump.
3. Clean up the water seal pipe and check whether the pipeline is unobstructed.
4. Clean oil bearings and bearings, clean stains, clean oil rings and oil level gauges. Ball bearings are used to clean up gasoline.
5. Parts and components that are not temporarily installed should be protected by oil after cleaning.